prolems in installing redhat linux 9.0

saimdaimee · Post by **saimdaimee** » Mon Mar 22, 2004 3:10 pm

assalamoalaikum

i am facing a problem in installing the redhat linux 9.0. the problem is that when i boot my computer from the redhat 9.0 cd and then i press enter for graphical interface installation then it detects the devices or disk drives etc after that it detects the vga card and mouse afther that it loads shows the setup window but the mouse pointer shows the cross symbol and then my monitor flicks and another window comes which close the linux and the message appears it is safe to reboot your computer and then i reboot this problem presists. please help me in solving this problem.waiting for your reply

thanks
allah hafiz
saim ali daimee

zaeemarshad · Post by **zaeemarshad** » Mon Mar 22, 2004 5:35 pm

never ever crosspost. you already posted this problem in another category.. dont do that again.

-Zaeem

Post by **LinuxFreaK** » Mon Mar 22, 2004 11:22 pm

Dear saimdaimee,
Salam,

May be your Graphich Card does not supported can you please try to install again in Text mode and don't configure your VGA Card just skip that section and if the problem persist then do lemme know

Best Regards.

jargon · Post by **jargon** » Tue Mar 23, 2004 1:37 pm

how about letting us know what kind of graphics card it is???

saimdaimee · Post by **saimdaimee** » Wed Mar 24, 2004 10:05 pm

assalamoaliakum

well my graphics card is intel 810

allah hafiz

Post by **Zaheer** » Thu Mar 25, 2004 12:07 am

AOA,
U mean ur video card is a builtin one which comes with Intel 810C or E series of Mother Boards.Am I right.So Redhat 9.0 must detect ur Video Card automatically if it is a built in one.

jargon · Post by **jargon** » Thu Mar 25, 2004 7:56 am

Redhat doesn't have to do jack if it doesn't understand the video card.

Your card is onboard video integrated onto the Intel 810 Chipset.

Might want to check these out...

http://support.intel.com/support/chipse ... 009231.htm

http://www.google.com/search?q=intel+81 ... gle+Search

The following is from : http://www.tldp.org/HOWTO/Hardware-HOWTO/video.html

Card Name Chipset XFree86 3.x Driver XFree86 4.x Driver
Intel 810 Intel 810 XF86_SVGA i810

saimdaimee · Post by **saimdaimee** » Thu Mar 25, 2004 1:23 pm

assalamoaliakum

well i am forgot to specify the error details which was gerated by the linux
the is as follows:

XIO: fatal IO error 104 (connection reset by peer) on X server ":1.0" after 0 requests (0 known processed) with 0 events remaining .
installing exited abnormally.

please help me out

thank you
allah hafiz

xscitech · Post by **xscitech** » Tue Mar 30, 2004 10:34 am

saimdaimee wrote:assalamoaliakum

well my graphics card is intel 810

allah hafiz

I have the same intel bultin vga chip 810 series of original intel motherboard D815EEA2 & i had'nt found any trouble during or after installtion of RH9 even i tried in KOBIAN Fsfx motherboard which have the same builtin vga. what i did during installation is i didnt tried to modify any default settings coz linux RH9 smart enough to detect bultin sound, vga may be sound can create problem but it'll also sort out.

So, if u have still the same problem then i recomend do not edit any settings of vga

try to learn linux day by day...

Post by **LinuxFreaK** » Tue Mar 30, 2004 10:43 am

Dear saimdaimee,
Salam,

Please Check this out http://www.intel.com/support/graphics/l ... aphics.htm

Best Regards.

asif iqbal · Post by **asif iqbal** » Tue Mar 30, 2004 4:49 pm

zaeemarshad wrote:never ever crosspost. you already posted this problem in another category.. dont do that again.

-Zaeem

it means that he has not answered properly,we are here to solve problems
but nobody is perfect .

linuxpakistan.net

prolems in installing redhat linux 9.0

prolems in installing redhat linux 9.0

Re:

Video Card

about the problem in installing redhat linux 9.0

Do this...

Re: